CalqenfrarptSign in

Workflows / Furniture and interiors in the BIM model

Furniture and interiors in the BIM model

Furnish rooms in a browser BIM model: a component library, rooms furnished for you with clear floor kept, your own 3D models brought in as components, interior elevations and room data sheets.

What it is

Furniture in Calq is part of the model. A bed, a sofa, a kitchen run or a basin is a BIM component with its size, its plan and elevation symbols and its IFC class, so it shows in plans, sections, interior elevations, 3D, schedules and the IFC file.

You place pieces by hand from the library, or a room is furnished for you from what a room of its kind needs.

How a room is furnished for you

The furnisher works from a programme, not a stamp: what a room of that kind must have and what it takes when it has the floor, by its area and by the home it belongs to. Each piece is tried along every wall, and a place counts only when it is possible.

The library and your own models

Interior drawings

Does it fit?

A line of the brief can name a furniture set, such as a double bed with clear floor at its sides and foot. Calq fits it in the room's own outline with the door swings kept clear, and says by how much a room that fails would need to be wider.

Good to know

The library, the import of your own models, the furnisher and the interior drawings are on the free account. Calq AI and a connected MCP assistant furnish rooms with the same engine. A layout it lays is a starting point: move any piece by hand.

A SketchUp file itself is brought in through its COLLADA export, and a very heavy mesh is simplified on the way in.

Questions

Can Calq furnish a room automatically?

Yes. A room is furnished from what its kind needs, each piece placed clear of doors and windows with floor in front of it to be used, and you can move anything by hand afterwards.

Can I import SketchUp or Blender models as furniture?

Yes. Export the model as COLLADA, OBJ or glTF and bring it into the library: it becomes a BIM component with plan and elevation symbols and an IFC class.

Does Calq draw interior elevations?

Yes. An interior view shows a room's walls from inside it, and a presentation template puts a room on a sheet with its plan and four walls, every item numbered.

Is furniture included in the IFC export?

Yes. Each piece is exported with the IFC class of its category.

Is the furniture library free?

Yes. The library, importing your own models and furnishing rooms are on the free account.

Related

Try it in CalqThe full guide is in Calq, for signed-in accounts.