Workflows / From photos and a tape to an as-built BIM model
From photos and a tape to an as-built BIM model
Give Calq AI the tape measurements and photographs of an existing house: each face is measured from its photos, the house is built as existing BIM elements, and every figure keeps its source.
- Beta
- On a paid plan
Beta: it works. Check what it makes.
What it is
A renovation or an extension starts from the building as it stands. In Calq a house is surveyed from what a homeowner or a surveyor can give: a few taped dimensions and a photograph of each face.
One rule holds the whole path: the vision model reads, the code measures, one engine builds. The AI marks what it sees in the photo in pixels and names it in words. It never types a metre. The geometry does the measuring.
How a survey goes
- Attach a photo of each face, taken from outside as square on as you can, and say which face it shows
- Give the figures you know: the width of a face, an eaves height, a room's taped sizes
- Each photo is straightened onto its face: the wall's four corners, every opening, the materials and a gable's apex become metres on that face
- Several photos of one face are merged: each opening is taken from the photo that saw it best, and the others are its witnesses
- The house is built in one step: walls on the outer faces in each face's build-up, openings, floors and roof, every element marked existing
Every figure says where it came from
A figure is typed, read off a drawing, measured from a photo or assumed, in that order of strength. A figure you typed always wins over one read from a picture. A height the photo could only guess is built and said assumed, never used quietly.
Where two photos disagree past the survey's tolerance, the conflict is listed for you to settle. The survey record stays with the model, so anyone can see what was measured and what was assumed.
A known building from one photo
A photo of a building can be studied before anything is built. Calq AI looks at it and searches the web: whether the building is known, its published size, its structure and its drawings, with the pages it read cited. The model then takes its scale from the published size, and the study is kept with the model as a source.
What you get
- The existing house as one BIM model, every element in the existing phase
- Materials read from the photos, such as facing brick, render, timber cladding, stone, clay tile or slate, named on the elevations
- The proposed work drawn on top as new elements, in the same model
- Existing and proposed plans and elevations, paired on the sheets of a planning set, to scale
- IFC and PDF out
Good to know
This workflow is Beta. A photo survey is as good as its photos and the figures behind it: take each face square on, give at least one taped dimension, and check the result against the building before you rely on it. It is a survey to design from, not a certified measured survey.
Reading a photo runs an AI model on Calq's side, so it needs Calq AI, on the paid plans; what each plan holds is on calq.live/pricing. Drawing the existing building by hand and phasing it are on the free account.
Questions
Can I make a BIM model of an existing house from photos?
Yes, in Beta. Give Calq AI a photo of each face and the dimensions you taped: each face is measured from its photos and the house is built as existing BIM elements, each figure with its source.
How does Calq measure from a photograph?
The wall's four corners in the photo give its perspective; the camera's focal length comes from the vanishing points or the photo's own data; one known dimension sets the scale. The AI only marks pixels, and the code does the measuring.
What if a dimension cannot be read from the photo?
It is built from an assumption and said assumed, in the survey record and on the answer. Type the real figure and it replaces the assumed one.
Can I draw the extension on the surveyed house?
Yes. The survey is existing elements of one model; you draw the new work in the same model, and the sheets pair existing with proposed.
Can Calq recognise a famous building from a photo?
Calq AI can study a photo with a web search and say whether the building is known, with its published size and the pages it read. A model built from that photo then takes its scale from the published size.
Is the photo survey free?
Reading photos needs Calq AI, on the paid plans. Drawing and phasing an existing building by hand, its drawings and its IFC export are on the free account.