CalqSign in

Made with Calq

Copper box studio: a floating copper volume over a glazed ground floor

A corner office whose two upper storeys are a copper box floating over a fully glazed ground floor set back behind a ring of columns, laid with Calq's own BIM tools. How it was made and how to make one.

The studio: the copper box over its glass ground floor.
The studio: the copper box over its glass ground floor.
Size
22 x 15 m
Height
11.4 m
BIM elements
642
Made with
Calq's own tools, with a script for the shading

Open the model, turn it, cut it, and make a copy of your own.

The building

A corner office 22 by 15 metres on three storeys. The ground floor is glass on every side and stands 2 metres back behind a ring of steel columns, so the two storeys above read as a copper box floating over it.

The upper corner is glazed and shaded by fins. Inside are a cafe on the ground floor, two open studios above, a WC core and a stair; outside, a paved plaza with benches and trees.

The box wears the same copper rainscreen wall type as the library. The model has 642 elements.

How Calq was used

  1. Frame and set-backThe grid and the columns stand at the line of the box; the ground floor curtain wall is laid 2 metres inside it.
  2. The copper boxThe upper walls are the copper wall type with slot windows, the corner a curtain wall with fins.
  3. Inside and outsideRooms, furniture, ceilings, the stair and the plaza with Calq's own tools; most calls were batched through calq.tool inside a script, still Calq's tools.
  4. The finsThe fins were made with run_script as IfcShadingDevice elements, the one part no Calq tool lays.

The Calq tools in this model

IFC classes

Drawings

Ground floor plan: the cafe and the core behind the glass.
Ground floor plan: the cafe and the core behind the glass.
Section: the box over the set-back ground floor.
Section: the box over the set-back ground floor.
South elevation.
South elevation.

Make one like it

  1. Frame the boxLay the grid and columns at the box's line, the beams at each floor.
  2. Set the glass backLay the ground floor curtain wall a couple of metres inside the columns.
  3. Clad the boxLay the upper walls in a copper wall type, glaze one corner, then the rooms and the stair.
  4. FinishFurnish, hang ceilings, lay the plaza and check.

Or ask Calq AI

Make a corner studio 22 x 15 m: two upper storeys as a copper box (a copper cassette rainscreen wall type with slot windows and a glazed corner with fins) on a steel frame, floating over a fully glazed ground floor set back 2 m behind a ring of columns. Ground floor cafe, two open studios above, a WC core, a stair, ceilings and a paved plaza with benches and trees.

Paste this into Calq AI on a new model, or send it from ChatGPT or Claude through the Calq connector. Change the figures to make it yours.

Questions

How is the floating box made?

The columns stand at the box's line and the ground floor glass is laid 2 metres inside them, so the copper above overhangs on every side.

Was it laid with Calq's tools?

All but the fins, which a script made as IfcShadingDevice elements.

Every picture is the real model: the 3D taken from Calq's board in the Realistic display, the drawings drawn by Calq's own sheet writers. Nothing is rendered by AI.

Comments

    No comments yet. Be the first.

    Comments are public and show your Calq name. Be kind: comments that do not belong are removed.

    Topics

    More made with Calq

    Start a model in CalqA free account opens the board.All case studies