Workflows / Facade design
Facade design
Design a facade in the browser as real BIM elements: curtain walls on a grid, rainscreen cladding on its rails, louvres and fins, stacked wall types and window rhythms, drawn in elevation and written to IFC.
- Available
- Free account
What it is
A facade in Calq is built from the parts it is made of on site, not from a texture. A face of a wall, a mass or a roof takes a system: glass on a grid, opaque panels on a sub-frame, or blades that shade. Each panel, mullion, rail and blade is an element with its type, its material and its IFC class.
A system belongs to its face. When the wall moves, changes size or gains an opening, the system is laid again by the settings it was laid with, and its parts keep their identity.
Curtain walls
- A grid set out by rule both ways: a fixed distance, a number of bays, a maximum or a minimum spacing
- Grid lines added, moved and removed by hand where the rule is not enough
- Panels of vision glass, spandrel or solid, and mullions and transoms with their profiles
- A curtain system on any flat face, sloped too: the side of a mass, a roof plane, a glazed atrium roof
- Written to IFC as one curtain wall of plates and members
Cladding and shading
- Rainscreen: cassettes, stack bond or running bond panels on carrier rails and stand-off brackets
- A rainscreen runs round an outside corner and stops at an inside one
- Shading: louvres, vertical fins, a brise-soleil, an egg-crate, or fins and caps on the mullions of a curtain wall
- Each blade is written to IFC as a shading device, the system as one assembly
Walls and openings
A wall can be a stack of wall types by height: a stone plinth under brick under a rendered parapet. Its layers wrap at ends and openings, and its section can taper, step or follow a profile you draw.
Windows and doors keep a rhythm: place two on a wall and the next goes in at the same spacing. The Brush lays windows along a stroke on an elevation, every few metres, as a ribbon or in pairs.
A whole facade in one move
A facade preset dresses the outside walls of a building in one step: its openings, its bays and its materials, from families that run from contemporary and modernist to regional and Middle Eastern traditions. Apply it to the building or paint it along one face with the Brush, then edit every element it laid.
Calq AI can choose and apply a preset, lay shading or a rainscreen on the faces you name, and read a facade photo. AI facade options are on Professional.
What you get
- Elevations to scale, with the materials named on leaders and the faces hatched
- Sections through the wall build-up, layer by layer
- Schedules of panels, windows and doors read from the model
- Shadow studies of the facade with the model's sun
Good to know
Curtain walls, rainscreens, shading, wall types and facade presets are part of the modeller, on the free account. Calq AI and the AI facade options come with the paid plans; what each plan holds is on calq.live/pricing.
A facade system gives the parts and their set-out. The engineering of fixings, wind loads and thermal breaks is the facade engineer's, and the model goes to them as IFC.
Questions
Can I design a curtain wall online?
Yes. Calq lays a curtain wall on a grid set by rule or by hand, with glass, spandrel and solid panels and mullions, on upright and sloped faces, in the browser on the free account.
Does Calq model rainscreen cladding?
Yes. A rainscreen is laid on a face as panels on carrier rails and brackets, in cassettes, stack bond or running bond, and it is laid again when the wall changes.
Can I add louvres or a brise-soleil to a facade?
Yes. Louvres, vertical fins, a brise-soleil, an egg-crate and mullion fins are laid on a face as real blades, each written to IFC as a shading device.
Are facade elements exported to IFC?
Yes. A curtain wall is one IfcCurtainWall of plates and members, a rainscreen and a shading system are assemblies, and every wall keeps its layers.
Can a wall change material up its height?
Yes. A stacked wall type lays wall types one over another by height, and plans, sections and the IFC read the build-up at each height.
Can Calq apply a facade style to a whole building?
Yes. A facade preset dresses the outside walls in one step, and everything it lays is ordinary elements you can edit.