Workflows / Sun and shadow study on the BIM model
Sun and shadow study on the BIM model
Set a date and a time and see the sun's path and the building's shadow on the plan, the elevations and the 3D view of a BIM model, for the site's own latitude and true north.
- Available
- Free account
What it is
A Calq model has one sun. It stands where the site's latitude, true north, the day and the hour put it, and every view is lit by it: the shadows in 3D, the shadow on the plan and the sun's path in an elevation or a section are the same study.
The study is part of the model, so it is saved with it and a change of the hour is one step you can undo.
How it goes
- Place the model on the map or set its true north; the latitude comes from where the site is
- Turn on Sun on a plan, a 3D view or an elevation
- The plan draws the day's path as an arc round the building with its hours, the sun on it, and the building's shadow on the ground
- Pull the sun along its path: the hour follows, and the shadow moves in every view
- Type any day and any time, or pick one of the four study days: 21 March, 21 June, 23 September, 21 December
What you read
- The day, the hour, the sun's height above the horizon and its bearing from true north
- The latitude the study is for: the site's own, or an assumed one, said as assumed, while the model is not located
- The building's shadow on the ground, cast by its walls, columns, masses, slabs and roofs
- Cast shadows in the shaded and realistic 3D displays
- The sunrise and the sunset of the day; below the horizon the study says the sun is down
One sun for every engine
The same sun is read by everything in Calq that depends on it: the light of the 3D view, the walkthrough film, the facade, the massing scores and a form graded towards the sun. A form the sun grades is laid again in the same step that moves the sun.
When Calq compares building forms for a large brief, the evidence includes the sun: each daylit window is measured against the 25 degree line of BR 209 across the storeys opposite, and a courtyard is checked for sun at noon on 21 March at the site's latitude.
Who it is for
An architect testing a massing against its neighbours, a designer placing a terrace or a courtyard, a student learning how a building sits in its light, and anyone who must show a client or a planner where the shadow falls at a given hour.
Good to know
The sun and shadow study is on the Free account. The hour is the local solar hour, where 12 is solar noon. Neighbouring buildings brought in from the map stand in the model and in the 3D view with the building.
Locate the model before you rely on a study: an assumed latitude is said on the study itself. Check a submission's own daylight method with the authority that asks for it.
Questions
Can I do a shadow study online for free?
Yes. In Calq the sun and shadow study is on the Free account: model or bring in the building, turn on Sun, and set the day and the hour in the browser.
Can I see the shadow on a floor plan, not only in 3D?
Yes. A plan draws the sun's path round the building with its hours and the building's shadow on the ground. Elevations, sections and 3D views show the same sun.
How does Calq know where the sun is?
From the site's latitude, the model's true north, the day of the year and the solar hour, by one formula that every view and engine reads. With no location, the latitude is assumed and the study says so.
Can I study the solstices and the equinoxes?
Yes. 21 March, 21 June, 23 September and 21 December are one click each, and any other day and time can be typed.
Does the shadow study change when I change the design?
Yes. The shadow is cast from the model as it stands, so a wall moved or a storey added changes the shadow in every view at once.