Workflows / Georeferencing and project coordinates
Georeferencing and project coordinates
Set the project base point, the survey point, true north and the map grid of a Calq model, and its IFC, DXF and terrain exports carry real map coordinates, with the grid convergence worked out for you.
- Available
- Free account
What it is
A Calq model has one record of where it is: the project base point the building is set out from, the survey point that ties a point of the model to map coordinates, the grid those coordinates are in, and true north. Every view draws the same marks from it and every export reads it.
You draw near the origin, in metres, as on any drawing. The map coordinates are a statement about the model, so a building never has to be drawn millions of metres from zero.
How it goes
- Place the project base point where the building is set out from
- Place the survey point on a known point and type its eastings, northings and height
- Choose the grid by its EPSG code, and the datum of the heights
- Set true north, or take it from the map
- Export: the IFC, the DXF and the terrain carry the coordinates
What Calq works out
- The grid convergence, the angle between true north and grid north, from the grid itself unless you type it
- The grid's scale factor at the site, when you ask for grid distances
- Level heads in project heights or in map heights, by your choice
- A model drawn in map coordinates is recentred near the origin with its survey point kept, so no distance is too far
- Moving the base point carries the model with it in one undo step, or moves the point alone when you say so
The grids
A grid is named by its EPSG code. Calq holds national grids such as the British National Grid, Lambert-93, the Dubai Local TM, the Qatar National Grid, RD New, LV95 and the New Zealand Transverse Mercator, and works out any UTM zone and the MGA zones of Australia from their code.
True north is kept to a hundred-thousandth of a degree.
In the files
- IFC: the map conversion and the projected coordinate system, with the convergence folded in, as IFC4 defines them
- DXF: in project coordinates or in map coordinates, by your choice
- The terrain as LandXML, and gbXML with the building's place
- Linked models placed by shared coordinates, through each model's survey point and grid
Good to know
Coordinates are on the free account, like every export. The survey point's coordinates are the surveyor's: Calq carries the figures you type and transforms them, and a grid's code is yours to choose.
A site taken from the map places the model for design work. For setting out, type the coordinates of a surveyed point.
Questions
How do I georeference a BIM model?
In Calq, place the survey point on a known point, type its eastings, northings and height, choose the grid by its EPSG code and set true north. The exports then carry map coordinates.
Does Calq write IfcMapConversion?
Yes. The IFC export carries the map conversion and the projected coordinate system, with the grid convergence included.
What is the difference between the base point and the survey point?
The project base point is where the building is set out from. The survey point ties one point of the model to coordinates on the map grid.
Can I work with a survey drawn in real-world coordinates?
Yes. A model drawn in map coordinates is recentred near the origin and its survey point keeps the real coordinates, so nothing is lost and nothing is drawn far from zero.
Which coordinate systems does Calq support?
Grids named by EPSG code: national grids such as the British National Grid, Lambert-93 and the Qatar National Grid, and every UTM zone, with a datum for the heights.
Is georeferencing free in Calq?
Yes. The base point, the survey point, true north and georeferenced exports are on the free account.