Workflows / Hospital design from a brief of departments
Hospital design from a brief of departments
Give Calq a hospital brief as a spreadsheet of departments and rooms: it compares building forms, draws massing options, lays every room at its net area and measures the flows, as a BIM model you edit.
- Beta
- On a paid plan
Beta: it works. Check what it makes.
What it is
A hospital brief runs to hundreds of rooms in dozens of departments. In Calq the brief is a record in the model, and a department engine lays it out: every room at its net area, typed from one table of clinical rooms, on the storey its line names, beside the departments it must be near.
It is never one typical plan. A design search tries each building form in several proportions and department orders, fits them to the site, measures them and builds the best three different schemes for you to compare.
How a hospital goes
- Bring the brief as a spreadsheet or a Word table: departments, rooms, areas, counts. A line may say its storeys, its access and what it must be near.
- Calq AI draws the best different schemes as masses first: one volume per department per storey, in its colour, with the ways through and the cores in grey.
- You choose one, move or turn it, shift a department to another storey, or ask for others.
- The chosen scheme is laid as rooms, walls, doors, corridors, stairs and lifts, every room linked to its line of the brief.
- The flows are checked and the building in use is simulated; what they find is listed with the rooms it concerns.
The building forms it compares
- Street and wings: a hospital street with wings off both sides and light courts between them
- Courtyards: rings of corridor round open courts, with a court sized by the daylight line
- Deep plan: corridor loops with the daylit rooms outside and the rooms that need no window inside
- Hub and arms: a hall at the middle and arms off it as each storey needs them, a bar, an L, a T or a cross
What is measured
Each scheme answers to evidence, not to taste. The figures are shown beside each option, and a figure that rests on an assumption says so.
- Daylight: every daylit window against the 25 degree line of BRE BR 209, across all the storeys opposite
- Sun in the courts at noon on 21 March, at the site's latitude
- Walks: along the corridors between departments, and a nurse's walk on the ward
- Escape, the fit on the site, and the plot's own rules where the site gives them: setbacks, height, storeys, coverage and floor area ratio
- Cost and carbon as indices for comparing options, not as an estimate
Flows and the building in use
One check reads the flows of the laid building. One simulation then runs its journeys through the doors, corridors and lifts as they are drawn: an ambulance arrival to the CT scanner and on to intensive care, an outpatient visit, a surgical patient from ward to theatre and back, meals to the ward pantries, sterile instruments from CSSD to the theatres and used ones back, waste, specimens and visitors.
Dirty loads ride the core's dirty lift and are routed round the clean corridors. A dirty load through a clean room, or clean and dirty loads in one lift, is reported as a fault. A corridor both must share is said, with its sealed containers.
What you get
- A BIM model of ordinary elements: storeys, walls with their types, doors sized for beds, rooms, stairs and lifts
- The brief tracked room by room: delivered area against the area asked, to 0.01 m2
- Storeys that come out the same kept as one unit and its copies, so an edit reaches every copy
- Plans, sections, schedules and sheets from the same model, and IFC out
Good to know
The engine's room types and dimensions follow the UK Health Building Notes it cites (HBN 00-04 for circulation, HBN 04-01 for inpatient wards, HBN 26 for theatres) and BRE BR 209 for daylight.
This workflow is Beta: it gives a planning team a measured first design to work on, and clinical planning stays the team's judgement. Check the plans, the sizes and the code before you rely on them.
A brief of this size is built with Calq AI, and the use simulation and flows are part of Professional's project automation; what each plan holds is on calq.live/pricing. Editing the model, its drawings and its IFC export are on the free account.
Questions
Can Calq design a hospital from a room schedule?
Yes, in Beta. Calq AI reads the spreadsheet into the brief, draws three different massing schemes to choose from, then lays every room of the chosen one at its net area as editable BIM elements.
Does it generate one layout or several?
Several. The design search tries street and wings, courtyards, deep plans and hub and arms, and shows the best three different schemes with their measured figures.
How are clean and dirty flows checked?
A simulation routes each journey through the drawn doors, corridors and lifts. A dirty load through a clean room, or clean and dirty loads in one lift, is listed as a fault with the rooms it concerns.
Can I edit the hospital after it is laid?
Yes. It is an ordinary Calq model: every wall, door and room can be changed by hand or by asking, and the brief stays tracked while you change it.
Which standards does the hospital engine follow?
Its room types and dimensions cite the UK Health Building Notes HBN 00-04, HBN 04-01 and HBN 26, and daylight is measured by BRE BR 209. The building code you set on the model is checked separately.
Does the model leave Calq as IFC?
Yes. The hospital exports as IFC4 Reference View, IFC 4.3 or IFC2X3 from the browser, with its rooms as spaces, on the free account.