Workflows / LOD 400 architecture: envelope, openings, interiors
LOD 400 architecture: envelope, openings, interiors
Architecture from LOD 300 to LOD 400 in one Calq model: walls with every layer measurable, rainscreen panels with their rails and brackets, curtain walls with mullion profiles and panels, doors and windows by type and operation, ceilings, finishes and the details drawn from the model.
- Available
What LOD 400 asks of the architecture
For the envelope and the interiors, LOD 400 means the parts a maker produces and fits: the panels and their fixings, the mullions and transoms, the frames and leaves of doors and windows, the layers of a wall as they are built, the tiles of a ceiling. Each maker develops their own part from the coordinated model.
In Calq the architecture's elements carry their make-up as data the whole team reads: a wall type is its layers, each a material, a thickness and a function; a curtain wall is its grid, its mullions and its panels; a door is its frame system, its operation and its hardware.
Walls and build-ups
- Draw walls on the Walls and openings shelf, then give them their real types: select and pick a type, or ask Calq AI "type the external walls by region, brick and block cavity at the street, render on block at the back" (create_walls, set_types, type_walls_by_region).
- Edit a type's layers in the type browser: each layer a material, a thickness and its function (structure, insulation, membrane, finish), so every layer can be measured by area and volume and is written as an IfcMaterialLayerSet.
- Write the fixings, anchors, thermal breaks, flashings, sealants and cavity closers on the wall type: the auto details draw them at the base, the head, the sill, the jamb and the roof edge (detail_view; the Annotate shelf, Details).
- Lay a rainscreen as real parts: panels, carrier rails and brackets, one assembly per wall face (create_rainscreen).
- Lay brick by brick where a face is shown in masonry: the masonry shape lays each unit with the openings left clear (set_shape).
- Develop the architecture in one step from what the model holds: each door type records its operation, frame, threshold and hardware, each window its sash and frame, each wall type that holds openings the parts that join a frame to it, and the LOD each element reaches is read back (develop_lod, check_lod).
Curtain walls, windows and doors
- Curtain walls: the Walls shelf, Curtain wall, or Calq AI "a curtain wall on the south face, 1.5 m bays, spandrels at each slab" (create_curtain_walls, set_curtain_grid, set_curtain_panels; on a sloped mass, curtain_on_mass). Mullions are written as IfcMember, panels as IfcPlate, with rectangular, L, T, round and corner mullion profiles.
- Windows and doors: each type its frame system and sizes, its sashes and their opening, its leaves, lining and threshold, its hardware (lever, pull, push, panic bar, closer, kick plate, automatic). Place and swing them with the Openings group (place_openings, swing_doors, create_type).
- Louvres and shading: blades on windows, doors and facades (create_shading).
- The door, window and curtain wall schedules read from the model, and the jamb, head, sill, threshold and mullion details drawn from the types.
Roofs, ceilings and finishes
- Roofs with their falls, membranes, inverted and green build-ups, gutters, box gutters, downpipes and parapet outlets, roof lights and dormers cut through the covering and framed (create_roof, roof_openings).
- Ceilings per room: continuous, rafts or baffles, with the tile grid of their type drawn on the reflected ceiling plan (create_ceilings, add_ceilings).
- Finishes per room and on walls: floor, wall, ceiling and base finishes, tiling, paint, panelling bands, skirtings and architraves, written as IfcCovering (set_rooms, dress_walls).
Hand it to the makers
- The IFC with every wall's layer set, the curtain wall's members and panels, the rainscreen's panels, rails and brackets, and the coverings
- Schedules of doors, windows, curtain wall panels, finishes and areas, as sheets or spreadsheets (get_schedule, export_schedule)
- Plans, sections, elevations and details as PDF, DXF and DWG (export_drawing)
- Assembly drawings of a group of elements: a plan, two sections, a 3D view and its parts list on a sheet (make_assembly, assembly_views)
Questions
Are a wall's layers separate objects in Calq?
A wall is one element whose type is a set of layers, each measurable by material, thickness, area and volume, and written to IFC as an IfcMaterialLayerSet. A rainscreen is laid as separate panels, rails and brackets.
Can Calq draw construction details?
Yes. The auto details draw the build-up, the base, the head, the sill, the jamb, the threshold, the roof edge and the mullion from the model's own types, and a drafting view can be detailed by hand.
Can I model a curtain wall with its mullions?
Yes. A curtain wall is a grid with mullions as members of a chosen profile and panels as vision, spandrel or solid infill, and doors or windows can sit in its cells.