Workflows / Site and landscape through the levels of development
Site and landscape through the levels of development
The site in one Calq model, level by level: the ground graded with breaklines and volumes, roads on an alignment, paving, kerbs, courts, walls, trees and planting as IFC elements, the plot enclosed, and the terrain and set-out files a surveyor reads.
- Available
How the site develops
At LOD 100 and 200 the site is the plot, the ground and the extents of what goes on it. At LOD 300 the ground is graded to its levels and slopes, and each surface, wall and tree is at its size and place. LOD 350 and 400 add the joints, edges, sub-bases, drains and fixings each landscape maker builds.
In Calq the ground and what stands on it are part of the building's own model, in the project's coordinates, so the building sits on the graded ground and every drawing and export reads both.
The ground
- Build the topography from survey points, a file or the map (build_topography, read_topography_file; the Site shelf).
- Grade it: pads, platforms, raised and flattened areas, slopes, spot levels, swales, berms and the building seated on its platform (edit_topography), with breaklines and contours.
- Read it: where water runs, profiles, the best platform level, cut and fill volumes, written as IfcEarthworksCut and IfcEarthworksFill in IFC 4.3 (read_topography).
Roads, paving and walls
- Roads on an alignment with stations, written as IfcAlignment (set_alignment, alignment_stations).
- Driveways, aisles, parking, paving, plazas, decks and courts with their markings, kerbs and ramps, written as IfcPavement and IfcKerb (place_site_elements; the Site shelf).
- The plot enclosed when you ask: boundary walls as real walls on the plot line, gates and parking behind them (enclose_plot). A retaining wall drawn as a typed wall takes a strip footing and reinforcement like any wall.
- Develop the landscape to LOD 350 or 400 in one step: under each pavement its build-up and sub-base, its joint pattern and thickened edges, and the detail each landscape element can take; then read each section of the specification and the LOD it reaches (develop_landscape_lod, read_landscape_lod, site_lod).
Planting
- Trees by species with their canopy and height, avenues and groves; shrubs one by one; hedges, planting beds, lawns, meadows and green roofs (place_site_elements, lay_out_plot), written as IfcGeographicElement.
- Retained and removed trees told apart by phase (set_phases).
What leaves the model
- The terrain as LandXML and as points (export_exchange, landxml and topocsv)
- Set-out coordinates of the grid crossings, column centres and building corners (export_exchange, setout)
- Site plans at a scale of the one scale table, the IFC with every site element in its class
Questions
Can Calq grade a site and give cut and fill volumes?
Yes. The ground is graded with pads, slopes, spot levels, swales and berms, and the cut and fill volumes are read from it and written to IFC 4.3.
Are trees and paving BIM elements?
Yes. Trees, shrubs, beds and lawns are written as IfcGeographicElement, paving as IfcPavement and kerbs as IfcKerb, each with its size and place.