CalqenfrarptSign in

Workflows / Mosque design

Mosque design

Design a mosque in the browser with domes, minarets, the mihrab, muqarnas and crenellations from the building traditions of the Islamic world, each a closed BIM solid drawn in plan, section and elevation.

What it is

Calq has engines for the parts that make a mosque a mosque. A dome, a minaret, a mihrab, a tier of muqarnas and a line of merlons are each built as a closed solid from a tradition's own proportions, not placed as a picture or a generic block.

They stand on an ordinary BIM model: the prayer hall's walls, floors, columns and rooms are modelled like any building, and the same model gives the drawings, the schedules and the IFC file.

Domes

Minarets and the mihrab

Muqarnas and crenellations

Muqarnas are built tier by tier from real cells, in the manner of a tradition: Mamluk stone, Seljuk stone, Persian and Timurid tile, Nasrid plaster, Ottoman marble, Maghrebi cedar and plaster, Mughal sandstone. They form a portal's hood, a cornice or the corbel under a minaret's balcony.

A parapet takes merlons from a pattern: square, triangular, stepped, serrated, trefoil and more. Each is one profile extruded along the wall.

The qibla

The qibla bearing is worked out from the site's latitude and longitude, measured from true north, so the qibla wall and the mihrab can be set on it once the model is placed on the map.

What you get

Good to know

Domes, minarets, muqarnas and merlons are on the free account, with the modeller and every export. A facade preset from the mosque family dresses the whole building in one step; Calq AI, on the paid plans, can apply it for you.

The solids give the form and its drawing. Their structure and stonework are the engineer's and the mason's to design, from the IFC and the sheets.

Questions

Is there BIM software for mosque design?

Yes. Calq is a BIM modeller in the browser with engines for domes, minarets, the mihrab, muqarnas and merlons, each built as a closed solid and written to IFC.

Can I model an Ottoman or a Mamluk minaret?

Yes. A minaret style is one tradition, Ottoman and Mamluk among them, with its shaft, balconies and top derived from a measured exemplar. Every proportion can then be changed.

Does Calq calculate the qibla direction?

Yes. The qibla bearing is computed from the site's latitude and longitude, from true north.

Can I put several domes on one roof?

Yes. A roof takes one dome, a row, a grid of domes over a hypostyle hall, three domes, a central dome ringed by smaller ones, or one dome with corner cupolas.

Are muqarnas modelled as real geometry?

Yes. Each tier is a closed solid of real cells, built by one rule in the manner of a named tradition, and drawn with its true silhouette in elevation.

Is mosque design in Calq free?

Yes. The dome, minaret, muqarnas and merlon engines, the modeller and every export are on the free account.

Related

Try it in CalqThe full guide is in Calq, for signed-in accounts.