Workflows / Building code check on the BIM model
Building code check on the BIM model
Calq holds building codes as data, every figure with its clause and its source, and checks the model against the code you set: exits, walking distances, widths, doors, ramps and fixtures, shown on the drawings and in 3D.
- Available
What it is
In Calq a building code is data, one file per jurisdiction. Each figure carries the clause it comes from, the address of the published text and whether it was read in the code's own words or in an official guide. A figure that could not be read in a published source is not held.
You set the code on the model and Calq checks the model against it while you design. What fails is drawn where it is, on the plans and in 3D, with its clause beside it.
How it goes
- Choose the project's building code: the country, then the code
- Say what the building is: its occupancy group, whether it is sprinklered, and its type of construction where the code asks for one
- Model the building, or bring one in as IFC (import is Beta)
- Read the check: each rule passed, failed or not measured, with its clause and the elements it was measured on
- Change the model and the check follows
What is checked
The rules are read from the code's own layers, laid one over the other by one reader: the general rules, the rules for homes, the rules of the occupancy group and the rules for one house. What a file holds differs from code to code, and each file says what it holds.
- How many ways out a room and a storey need, and the walk to them
- The persons a room holds, from the code's own table of floor area a person, and the width they need at doors, stairs and corridors
- Doors by clear width, height and swing; stairs and ramps by their sizes and slopes
- Room sizes and heights in homes
- Sanitary fixtures against the persons, once the model holds a sanitary piece
- A wall's openings by its distance to the plot line, and the building's height, storeys and area by its type of construction, where the code's file holds them
The codes Calq holds
Calq holds code data for Saudi Arabia, the United Arab Emirates (Abu Dhabi and Dubai), Qatar, Kuwait, Bahrain, Oman, Jordan, Egypt, Morocco, the United Kingdom (England, Scotland and Wales), Ireland, France, the United States (the ICC model codes), Canada, Australia, India, Singapore, Colombia and Peru.
Beside its figures, each code has a register over the building's whole life, from planning to demolition: the documents and the duties of each stage, each with its source.
One reading for people and assistants
The Code panel on the board, Calq AI and any AI assistant connected to your Calq account read the same data through one reader. An assistant can ask what a code says about a stair or an exit and get the figure with its clause and its address.
The occupancy is read once for the whole model: your own choice first, then the building type of the brief, then the rooms. A building is counted as sprinklered only when the model says so.
Good to know
It is a pre-check, never a certificate: the authority decides. A rule the code's file does not hold, or one the model gives no way to measure, is said as not held or not measured, and is never counted as a pass.
Choosing a code and reading its figures and its register are on every plan, Free included. The check on the model is part of Studio, by a number of models a month: what it holds is on calq.live/pricing.
Questions
Can Calq check a BIM model against a building code?
Yes. Set the building code on the model and Calq checks exits, walking distances, widths, doors, stairs, ramps and fixtures against it, and draws what fails on the plans and in 3D with its clause.
Which building codes does Calq hold?
Codes of Saudi Arabia, the United Arab Emirates, Qatar, Kuwait, Bahrain, Oman, Jordan, Egypt, Morocco, the United Kingdom, Ireland, France, the United States, Canada, Australia, India, Singapore, Colombia and Peru. Each file says what it holds.
Is the building code check free?
Reading a code, its figures and its register is free on every plan. Checking the model against the code is part of Studio; calq.live/pricing says what it holds.
Does the check replace the authority's review?
No. It is a pre-check made while you design, never a certificate. The authority that issues the permit decides.
Where do the figures come from?
From the published text of each code. Every figure carries its clause, the address of its source and whether it was read in the code's own words or in an official guide. A figure with no source that was read is not held.
Can an AI assistant read a building code from Calq?
Yes. Calq AI, and ChatGPT, Claude or any MCP assistant connected to your Calq account, read the same code data, each figure with its clause.