CalqenfrarptSign in

Workflows / Saudi Building Code check on the BIM model

Saudi Building Code check on the BIM model

Calq reads the Saudi Building Code as data and checks a BIM model against it by occupancy group: persons, exits, egress width, sprinklers, fixtures, building height and area, with every figure tied to its SBC section, and the Balady permit set from the same model.

What it is

Calq holds the Saudi Building Code as a data file: the rules of SBC 201 with the section each comes from, laid by occupancy group. Set the Saudi code on a model and the model is checked against it while you design, in Arabic or in English.

Calq is made in Madinah. The check, the plot rules of the Ministry, the Arabic sheets and the Balady upload slots are parts of one platform, read from one model.

How it goes

What is checked

Where every figure comes from

The 2024 Arabic volumes state each rule in words and send most figures to the English text. Calq says so on every clause: a figure reads as its 2024 section with the figure of the 2018 text, and the figures the 2024 text prints itself are marked as read there, with their Arabic words.

Every numbered section and table of the SBC volumes Calq has read is a row of a ledger. What Calq does with each row, measured on the model, held as a figure, or read only, is worked out from the live data, and the Code panel, Calq AI and connected assistants can read that coverage volume by volume.

The permit, from the same model

The Ministry's published residential rules are held as a named rule set and applied to a plot only when you name it. The plot check measures coverage, setbacks, height and parking on the building as designed.

For a building permit on Balady, Calq gives the values the form asks for under the platform's own Arabic labels, and prints the set one PDF per upload slot: the architectural drawing, the general site plan, the tables with elevations and sections, the facade image and the energy efficiency page. Sheets in Arabic are lettered right to left with the Saudi title block.

Good to know

It is a pre-check, never a certificate: the municipality and the authority decide. A rule that is not held, or not measured on the model, is never counted as a pass. The technical sizes the code takes from a referenced standard are held only where the code prints them.

Choosing the code, the occupancy group and reading the figures are on every plan, Free included. The check on the model, the plot check and the permit set are part of Studio: calq.live/pricing says what it holds.

Questions

Is there software that checks a model against the Saudi Building Code?

Yes. Calq checks a BIM model against the Saudi Building Code in the browser: occupancy, persons, exits, egress width, sprinklers, fixtures and the building's height and area, each rule with its SBC section.

Which edition of the SBC does Calq use?

The 2024 edition's sections. Where the 2024 Arabic text sends a figure to the English text, Calq uses the figure of the 2018 text and says so on the clause.

Can Calq prepare the drawings for a Balady building permit?

Yes. Calq prints the permit set from the model, one PDF per Balady upload slot, with the site plan to scale, the area and setback tables and the form's values in Arabic. It is a set to review before you submit.

Does Calq work in Arabic?

Yes. The interface is in Arabic, right to left, and a model in Arabic prints its sheets, schedules and reports in Arabic with the Saudi title block.

Is the SBC check a certificate of compliance?

No. It is a pre-check for the design office. The authority reviews and decides.

Can I read the Saudi Building Code figures for free?

Yes. Reading the code's figures with their sections is on the free account. Checking the model against them is part of Studio.

Related

Try it in CalqThe full guide is in Calq, for signed-in accounts.