CalqenfrarptSign in

Workflows / Gulf villa design

Gulf villa design

Lay out a Saudi or Gulf villa as it is lived in: the majlis on the street with its own guest entrance, the family side apart, rooms for the driver and the maid, and the roof annex, as an editable BIM model.

Beta: it works. Check what it makes.

What it is

A house in the Gulf is two houses under one roof. The guest side holds the majlis, its own door from the street, its wash room and the dining room. The family side has its own entrance, its hall and stair, the family living room and the kitchen. The household's staff are reached their own way.

Calq lays a villa by that pattern from one table of rules, then holds what it built to the same table and says which rules are met. Every wall, door, window, floor, stair and roof is an ordinary BIM element.

What the layout keeps to

How it goes

Where the rules come from

The rules of the two sides of the house are common practice in Saudi and Gulf houses, and Calq says them as practice, never as a clause of a code. The limits of the roof annex are the Ministry of Municipalities and Housing's published requirements for residential villas, read from the plot rule set with their clauses.

What you get

Good to know

It is Beta: a first design to work from. Check the plans, the sizes and the plot's own rules before you rely on them. The planner takes a rectangular footprint with a street face wide enough for both entrances; another footprint goes to the house designer, and Calq says so with the rules it misses.

Calq AI, on the paid plans, lays the villa from your words. An assistant of your own, connected by MCP, runs the same planner with its own AI on the free account. What each plan holds is on calq.live/pricing.

Questions

Can Calq design a Saudi villa floor plan?

Yes, in Beta. Calq lays a villa as a guest side with the majlis on the street and a family side apart, each with its own entrance, as an editable BIM model.

Does the majlis get its own entrance?

Yes. The majlis stands on the street side and is reached from a guest entrance, with a guest WC beside it, so a guest never passes a family room.

Are the driver's and the maid's rooms planned?

Yes. The driver's room is reached from outside only, with its own bathroom, and the maid's room opens off the kitchen or the laundry.

Can Calq add the roof annex?

Yes. The roof annex is laid as a storey of its own over the stair, held to the share and the setback the Ministry's requirements give.

Can Calq draw the boundary wall and the parking?

Yes, when you ask. The boundary wall is laid on the plot line under the height the plot allows, with the gates and the parking spaces behind the vehicle gate.

Are the villa rules a building code?

No. The rules of the guest and family sides are common practice, said as practice. Only the roof annex's limits are published requirements, with their clauses.

Related

Try it in CalqThe full guide is in Calq, for signed-in accounts.