Workflows / LOD 100: concept, zones and figures
LOD 100: concept, zones and figures
LOD 100 step by step: what an element is at the concept stage, what it may and may not be used for, and how to set up the project, study the plot and draw massing options in Calq before any wall exists.
- Available
- Free account
What LOD 100 means
At LOD 100 an element exists in the model, but not yet as itself. It may be a symbol, a zone, a mass that stands for a whole building or a figure carried by another element: the floor area of a mass, a cost per square metre, a cooling load per room. Its place is approximate and nothing measured from it is reliable.
That is not a weakness. LOD 100 is where the decisions that cost least to change are made: how much building, where on the plot, in what form, for what brief. A good LOD 100 model answers those questions quickly and honestly, and says which figures are assumed.
What each trade looks like at LOD 100
- Architecture: masses by use and by storey, gross areas, the plot and its setbacks
- Structure: a structural system named (frame, bearing walls, flat slab), a typical bay, no members
- Services: zones for plant, risers and ceiling voids; a load per square metre
- Site: the plot, the neighbours, the street side, the ground as read from the map
Build it in Calq, step by step
- Set the project up: the Project menu, Start, Setup. Calq proposes the storeys, the grid, the brief and what done means, each line with its source; a question that changes the outcome is asked once, or you answer "choose for me". Calq AI: "set up a mixed-use project on this plot, offices over shops" (propose_setup, then apply_setup).
- Write the brief: the Project menu, Start, Programme, or bring a spreadsheet in. Calq AI: "take this area schedule as the brief" (brief_from_table, set_programme).
- Read the plot: the Project menu, Start, Site. The neighbours, the street side and the ground are read from the map, the plot's rules from the zoning you give. Calq AI: "what can I build on this plot?" (get_site_feasibility, set_zoning, check_plot_rules).
- Draw massing options: the tool palette's Mass and form shelf, or Calq's own Plot study and From brief rows. Calq AI draws several different forms as one set of design options and stops for your choice (massing_options, build_from_brief).
- Compare them: each option with its gross area against the allowed, its coverage and its storeys (compare_options).
What LOD 100 may be used for
- Feasibility: how much floor area the plot allows and how the forms compare
- An order of cost from areas and rates, said as an order of cost
- A first sun and shadow study on the masses
- Not for: quantities of materials, structural sizes, clash checks or set-out
Moving to LOD 200
Choose the option. In Calq the chosen masses become the contract the next stage works to: the engines lay walls, floors, cores and rooms inside them, and the masses can be kept as a reference or taken out. Nothing is redrawn.
Questions
Can an LOD 100 element be a 3D mass?
Yes. A mass, a zone or a symbol are all LOD 100 when only their existence and approximate extent can be relied on. What makes it LOD 100 is the reliability, not the shape.
Can I get quantities at LOD 100?
Areas, yes: gross floor area by mass and by storey. Quantities of materials, no: there are no materials yet to count.
Does Calq choose the massing for me?
No. Calq draws different options and measures them; the choice is yours. You can ask for others, or move and reshape a mass by hand before the next stage works inside it.