CalqenfrarptSign in

Workflows / LOD 300: every element as designed, measurable

LOD 300: every element as designed, measurable

LOD 300 step by step: each element at its true size, shape, place and orientation, with its type, build-up, material and IFC class, and how Calq turns a scheme into a measurable design model with its drawings, schedules and IFC.

What LOD 300 means

At LOD 300 an element is modelled as designed. Its quantity, its size, its shape, its place and its orientation can be measured from the model and relied on, and it is placed in the project's own coordinates. It conveys the design intent completely for that element.

LOD 300 is where most designers' models stop, and where the tender drawings come from. It is not necessarily free of clashes: an element is at its true size so that the space it needs is known, and resolving every interface is the work of LOD 350.

What each trade looks like at LOD 300

Build it in Calq, step by step

Check LOD 300 before an issue

Moving to LOD 350

Find where elements meet and model the meeting: the openings each run needs through each wall and slab, the hangers and supports, the connections, the clearances for access and maintenance. Calq does most of that from what the model already holds; the next page shows how.

Questions

Does LOD 300 mean the model is clash free?

No. At LOD 300 elements are at their true size so the space they need is known. Resolving the interfaces between trades is LOD 350.

Are tender drawings LOD 300?

Usually. Plans, sections, elevations and schedules read from an LOD 300 model describe the design completely; the makers then develop their parts to LOD 350 and 400.

Does Calq size the structure and the services?

Calq sizes ducts and pipes from the flows you give and checks members against the loads you give, and says each figure's source. A structural design remains the engineer's: a default section is a placeholder and is said to be one.

Can I change a type later without redrawing?

Yes. An element keeps its id, its place, its hosted openings and its links when its type changes, and every drawing, schedule and export follows.

Related

Try it in CalqThe full guide is in Calq, for signed-in accounts.