Workflows / Stadium design
Stadium design
Lay out a stadium bowl in the browser from its seat count: the rows worked out from the sightline, the tiers, vomitories, concourses and roof built as BIM solids with their IFC classes.
- Beta
Beta: it works. Check what it makes.
What it is
A stadium's form is decided by its seats. Calq starts from the field and the number of seats and works the bowl out: the rows round the field at a row depth and a seat width, each row's rise from what its people must see over the row in front, the rows split into tiers, the vomitories through them, the concourse behind and the roof over every seat.
The result is not a mass with a label. Every part is a closed solid with its IFC class, drawn in plan, section and 3D like the rest of the model.
What you choose
- The field: football, rugby, or athletics with a football pitch inside the track
- The number of seats
- The form: one main stand, two long stands, a horseshoe open at one end, or a closed bowl
- The roof: cantilever trusses from the back of the stand, a cable ring, or none
What the engine works out
- The rise of each row from the C-value sightline, held to the steepest rake a tier may have
- The tiers, with a concourse between them and a gallery behind the last row
- Vomitories cut through the tiers as real openings, by the seats each serves
- The seats lost to gangways and vomitories, so the count is the seats that remain
- The roof placed so that it covers every seat and the last row still sees a high ball
- The structural frames under the rows and the roof, at a regular bay
The assumptions are said
Every figure the bowl is laid by is a planning assumption with where it comes from: the row depth and seat width recommended by the Guide to Safety at Sports Grounds, the pitch sizes of FIFA, World Rugby and World Athletics, a stated C-value. None is presented as a code figure, and each can be changed.
What you get
- Stands, tiers, concourses, frames and the roof as solids under two assemblies in the IFC file
- A plan in which each solid is drawn as it is cut or seen, and sections through the rake
- The seat count, the rows and the dimensions of the bowl, reported with the assumptions used
- A model you carry on in: the rooms under the stands, the stairs, the site and the drawings
Good to know
It is Beta: a first bowl to work from, to be checked by the design team against the safety guidance and the rules of the competition. The engine lays the seating, concourses, frames and roof; the stairs and the rooms under the stands are designed in the same model, and Calq says so when it hands the bowl over.
Calq AI, on the paid plans, builds the stadium from a sentence. An assistant of your own, connected by MCP, runs the same engine with its own AI on the free account. What each plan holds is on calq.live/pricing.
Questions
Can Calq design a stadium?
Yes, in Beta. From the field and the number of seats, Calq works out the rows, tiers, vomitories, concourses and roof and builds them as BIM solids.
How are the sightlines worked out?
Each row's rise comes from the C-value, what a spectator must see over the head in front, and is held to the steepest rake a tier may have. The rise is derived, not typed.
Which sports does the bowl take?
Football, rugby, and athletics with a football pitch inside the track, each at the size its governing body gives.
Is the stadium exported to IFC?
Yes. Every stand, tier, frame and roof part is a closed solid with its IFC class, gathered under assemblies.
Can I change the stadium after it is built?
Yes. Asking again with another form, roof or seat count replaces the bowl it laid, and the parts can be edited like any element.
Does the seat count allow for gangways?
Yes. A stated share of each row is taken for gangways and vomitories, and the count reported is what remains.