Workflows / Structural modelling in the BIM model
Structural modelling in the BIM model
Model the structure in the same BIM model as the architecture, in the browser: grids, columns, beams, braces, trusses, foundations, reinforcement and steel connections, with the analytical model written as IFC and SAF.
- Available
- Free account
What it is
The structure in Calq is part of the building model, not a second model beside it. Columns, beams, bearing walls, slabs and foundations are BIM elements with their sections, materials and IFC classes, drawn in the same plans, sections and 3D as the architecture.
Everything is connected. A column on a grid crossing moves with the grid, a beam end follows the column, beam or wall it frames to, a pad stays under its column and a strip footing is laid again along its wall. What is bound is read from where things stand, so moving an element off its host by hand lets it go.
What you model
- Grids and levels, with columns laid on the crossings, straight or slanted
- Beams, cantilevers, lintels and a whole frame on your grid in one step
- Braces, trusses and beam systems, each drawn with a few clicks
- Steel sections by name, tapered and segmented members, precast planks and beams, timber
- Foundations: pads, strips under walls, pile caps with their piles, piles and a raft
- Reinforcement kept on its host: main bars, links, top and bottom bars, wall bars and fabric, each bar laid from the host's own geometry and its cover
- Steel connections: base plate, end plate, fin plate, gusset and splice, with their plates and bolts
The analytical model
The analytical model is derived from the physical one every time it is asked for: member lines, nodes, panels and supports read from the footings. It is never a second model to keep in step.
You give the load cases and the loads on the elements, and pick combinations from presets that name their clauses. Calq writes it all as an IfcStructuralAnalysisModel in the IFC file and as a SAF workbook, the open formats analysis programs read.
The engineer's answer comes back into the model: a results table from the analysis is matched to the members, and each member keeps its utilisation, deflection and forces.
Calq lays it, the engineer designs it
Calq does the modelling work: it lays a frame on the grid, puts footings under the columns and the bearing walls, lays the bars a host calls for and reads the load path storey by storey. It never chooses a load, a bar or a section as a design: those figures are the engineer's, a default is a placeholder and says so.
That keeps the roles clear: the architect and the engineer work on one coordinated model, and the design stays signed by the person responsible for it.
What you get
- Framing plans with each member's mark and size, and members drawn as their true section in elevations and sections
- Structural drawings as a set: a framing plan for each storey with its member schedule, the foundation plan and the bar schedule
- A takeoff of the structure: counts, lengths, concrete volume, steel and rebar weight by storey and section
- Structural schemes side by side on the building's own bays, their rules of thumb said as assumed
- IFC with the physical structure, the bars as IfcReinforcingBar, the plates and bolts, and the analytical model; SAF for analysis
Good to know
Structural modelling, its drawings and the IFC and SAF exports are on the Free account. Calq AI, on the paid plans, can structure a building in one request and reports each step.
Check an exported file in the analysis program that receives it: what a program reads from IFC or SAF depends on that program. Sizes Calq lays by default are placeholders for the engineer to set.
Questions
Can I model structure and architecture in the same BIM model?
Yes. In Calq columns, beams, slabs, bearing walls and foundations are elements of the same model as the walls and rooms, and they stay connected to the grid and to each other as the design changes.
Does Calq export an analytical model?
Yes. The analytical model is derived from the structure and written as an IfcStructuralAnalysisModel in the IFC file and as a SAF workbook, with the supports, load cases, loads and combinations.
Does Calq design the structure for me?
Calq lays the structure and hands the analytical model to the engineer's analysis. The loads, the bars and the sections of the design are the engineer's own; a default Calq lays is a placeholder and is said to be one.
Can I model reinforcement?
Yes. Reinforcement is kept on its host element with its cover: main bars and links in columns and beams, top and bottom bars in slabs and footings, bars on each face of a wall, and fabric. The bars are drawn in 3D, listed in a bar schedule and written to IFC.
Is structural modelling free in Calq?
Yes. The structural elements, their drawings and the IFC and SAF exports are part of the modeller on the Free account.
What happens to the columns when I move a grid line?
A column on a grid crossing moves with the grid, the beams framed to it follow, and the pad under it stays under it.